A generation of CNC routers is helping carpenters generate new sources of revenues by producing wood, plastics and composites products in much less time and at far higher level of accuracy
CNC routers help Carpenters win new business A generation of CNC routers is helping carpenters generate new sources of revenues by producing wood, plastics and composites products in much less time and at far higher level of accuracy. A new generation of CNC routers is helping carpenters generate new sources of revenues by producing wood, plastics and composites products in much less time and at far higher level of accuracy than is possible using traditional power tools.
To make use of the new routers, carpenters produce electronic models of their products using computer aided design software.
Once the model is completed, the Techno CNC router can reproduce the geometry as many times as necessary with little or no supervision to an accuracy of +/-0.01mm.
The ability to accurately reproduce very fine details with minimal labor requirements is making possible for the carpenters that have adopted these methods to substantially increase their business volume.
Beyond that, they have been able to significantly reduce the cost of servicing their existing customers.
The new CNC routers that are the key to these improvements cost less than US$20,000 and can be programmed and operated by carpenters with minimal computer experience.
Further reading
CNC router halves curved millwork machine time
A PC-driven CNC wood router has produced miles of curved moulding and other custom millwork in 4000h - halving machine times - and has raised product accuracy by a factor of 10
Router cuts development from 2 months to 2 days
A CNC routing machine has enabled a guitar producing company to reduce product development time from two months to to two days and has made the company more profitable
CNC router boosts gun case production by 400%
When Champion Safe used power tools to produce gun case racks, only enough parts for 20 to 30 safes per day were made, but an unmanned CNC router produces parts for 120 safes/day
* Revenues increased - as an example of how these improvements can be accomplished, Unique Woodworking and Carving, Elk Grove Village, Illinois, USA, brought in US$130,000 in additional revenues last year that can be attributed directly to the company’s CNC router.
In its first year of operation, the US$16,000 machine paid for itself many times over.
The use of the CNC machine has made the company more competitive on custom jobs by allowing them to charge lower set-up fees than the competition.
It has also allowed the company to sell carved crown molding and chair rail for about 30% less that what competitors charge.
While the price advantages have helped attract new customers, the quality of the millwork ensures repeat business.
The CNC machine helps ensure quality by giving the Unique Woodworking a level of precision that is impossible to match with manual production methods.
Unique Woodworking and Carving offers standard and custom factory-direct millwork.
Its primary market is custom-built homes, and its products are sold to architects and builders primarily.
The standard product line includes bases, cases, crowns, moldings, dentils, blocks, chair rails, and trim.
The company produces a variety of custom woodwork, such as crown molding and chair rail carved with a customer’s unique pattern, doors, display cases, and so on.
Often their custom pieces are used in restorations where the builder is trying to match a style or molding pattern from the original structure.
A recent job for a Chicago hotel restoration, for example, involved making a conference table, large display case, and doors in the hotel’s original mission style.
Unique Woodworking mills products from the more common woods such as oak and poplar but also works in mahogany, bloodwood, satinwood, silky oak, and other exotic woods.
About two years ago, Unique Woodworking realized that with custom orders and 3D patterns being a growing part of its business, it made sense to look into computer technology that could automate the time-consuming aspects of this work and reduce its cost.
Carving a pattern on crown molding or chair rail, for example, offers a distinctive look that many people would like to have.
But carving by hand takes so long that it prices the product out of most people’s reach.
With a CNC (computer numeric controlled) router, they hoped to be able to carve the pattern much faster and thus, less expensively, driving the price down to where more people could afford it.
* CNC router search - the search for a CNC machine began with requests for literature from a variety of manufacturers.
The company got information about several machines in the US$35,000 to US$60,000 range but felt these were too expensive for their current volume of work.
Then they heard about the Techno CNC wood router which costs less than US$16,000 and is designed for production routing and drilling on a wide variety of materials including wood, plastic, MDF, solid surfacing materials, and nonferrous metals.
The price included the CNC programming system, which has the ability to generate complex contours with little programming effort.
The system features true 3D geometry construction plus IGES, DXF, and CADL converters so that geometry can be uploaded from nearly any CAD system, including Unique Woodworking’s TurboCAD program.
The combination of capabilities included in the Techno CNC system and the price seemed perfect for the Unique Woodworking’s needs, so the company purchased it in 1996.
Since installing the Techno machine, Unique Woodworking has been able to attract more custom work because the company is able to charge set-up fees that are about half those charged by other woodworking shops.
Custom jobs involve a set-up charge because the shop must create new knives for the milling machine, which cuts the linear profile of the piece.
The knives are ground out of high-speed steel by following a template made of plastic.
Unique Woodworking now saves several hours of set-up time by producing the templates on its Techno system.
The pattern for the knives is modeled in TurboCAD, and then exported to the CNC programming system.
There the user specifies the cutting tool, the cutter size, tolerance, feeds, and speeds and the software generates the toolpath for the router.
The Techno machine cuts plastic templates faster than anyone can cut them by hand.
The accuracy provided by the Techno CNC machine has come in handy on other tasks besides cutting knife templates.
The mission-style display case for the Chicago hotel was 12ft wide and 8ft tall and had mullions that ran all the way across to hold double-thick glass.
Unique Woodworking used the CNC machine to cut the mortises for the mullions to make sure there would be no assembly problems.
The conference table for the hotel, also done in mission style, had rails and styles in the design.
Twelve styles had to be centered between two leg members.
That demanded accurate placement of them about 5/8-inch apart.
Placing them this accurately would have been difficult to do by hand.
By using CAD to lay out the placement of the styles and the CNC machine to cut the mortises for the styles, accuracy was ensured.
* More work taken on - Designer Woodworking, a custom wood working business located in Manhattan, Kansas, now takes on jobs it wouldn’t have wanted in the past.
Tricky one-of-a-kind restoration projects and intricate architectural milling work that used to take too much time to be profitable have become a source of growth and profit.
By completing difficult jobs like these in hours rather than days, the company makes a profit on them yet keeps its fees in the range the customers can afford.
In business for 10 years, Designer Woodworking specializes in restoration, of both antiques and also modern furniture that has been damaged during moving or by excessive use.
In addition to restoration work, which makes up about 75% of its business, Designer Woodworking also does woodwork for local architectural projects.
Examples include stair rails, custom redwood screen doors to match decks, unique moldings, and so on.
For both types of projects, the company formerly lost some jobs and didn’t bid on others in situations where too much time was involved to make their work cost-effective.
Typically, the problem was curved pieces.
Prior to acquiring the computerized router, things like curved moldings in restorations and stair rails with sweeping curves were very time-consuming.
Designer Woodworking personnel worked from templates and in some cases, just getting the template right took many tries.
Following the templates, they cut the pieces by hand, but since hand cutting was imprecise it was usually followed by a great deal of sanding.
A recent project involving a custom walnut door offers a good comparison of the computerized router versus Designer Woodworking’s previous hand practices.
The door was a narrow solid door designed to be placed between a shower and a hot tub room.
The designer wanted the door to contain an ellipse-shaped inset starting at about two feet from the floor and going up to about six inches from the top of the door.
The door itself was 1.5in thick; the inset panel was 3/4in thick.
Without a computerized method of cutting out the ellipse shape, Designer Woodworking would have attached a pattern to the door to guide the cutter.
With the cutter’s ball bearing riding against the pattern, the operator would have cut out the shape.
The greatest difficulty was making the pattern perfectly.
Typically, a number of tries would have been needed to get it right.
In all, just making the pattern would have taken at least one day.
With the Techno router, creating the shape of the ellipse in the computer, then instructing the system to program the instructions for cutting took between 15 and 20 min.
Another 15 min were needed to set up the door on the table, so that within an hour Designer Woodworking was accurately cutting the ellipse.
Because the computerized router eliminated at least seven hours on this project, Designer Woodworking’s price of US$800 was acceptable to the customer.
Working by hand, the company would have charged between US$1200 and US$1300 and probably would not have got the job.
The efficiency made possible by the router has allowed Designer Woodworking to take on all kinds of jobs that previously weren’t profitable.
For example, the company is often asked to repair wall units that local soldiers bring back from Germany.
These units have crown moldings that often get broken in transport.
The sweeping curves in the moldings made this a difficult job in the past, but they are now easy to reproduce.
Similarly, Designer Woodworking sees a lot of broken rockers on rocking chairs.
These, too, had been difficult items to make profitably by hand due to their long curves.
But it takes only a few minutes to program rockers on the computer.
The actual cutting takes only minutes, as well, so that Designer Woodworking can handle a few dozen rocking chair repairs each week.
Although the efficiency made possible by the router has been key to winning new business, Designer Woodworking also finds that the greater accuracy they can now deliver also helps win work.
In the past, the company didn’t bid on projects like a 30-slot mail insert for a roll-top desk because dividing the area into 30 slots of identical size would have been nearly impossible by hand.
Using CAD/CAM for this project, the operator simply created a line of the desired width, 1.5 inches, duplicated it 30 times, and then used the resulting geometry as the basis for the toolpath.
This took about 15 minutes.
Grooves for the dividers in both the top and bottom halves of the insert met perfectly and each slot was exactly 1.5in wide.
Cutting took between 30 to 45 min compared to 3h by hand, but results would not have been nearly as accurate.
The entire job took about eight hours, which included finishing and installation in the desk.
This was about half the time this project would require if done manually.
* Curved mouldings - Culin/Collela, Mamaroneck, New York, USA, produced miles of curved moldings and other custom millwork using a Techno CNC wood router in 4000h, approximately half the time it would have taken using traditional methods.
The router also improved the accuracy of the work by a factor of ten, helping Culin/Collela deliver curved moldings, cabinets, and bookshelves that drew praise from the architect on the project.
Creating large curved wood pieces by hand would have meant making a trammel and physically swinging an arc to figure out the radii of curves.
Instead, Culin/Collela created shop drawings in its CAD system, then transferred the CAD data to the router’s cam system to create toolpaths for the router.
The Techno router then generated the highly accurate fiberboard templates, knife grinding templates, and cauls needed for the project.
A caul is a template used for bending that clamps wood into a curved shape.
Culin/Collela occupies a 12,000ft2 building in Mamaroneck, New York.
The company was formed when its president and vice-president, who each had a custom furniture business, met, married and later merged the two businesses.
The company employs 23 people and has recently been doing work at the Conyers Farm development outside Greenwich, Connecticut.
This is an exclusive enclave of multi-million dollar homes on lots of at least 10 acres.
One of Culin/Collela’s recent jobs was the woodwork for a 25,000ft2 house with a curved front wall.
Culin/Collela produced the entire interior molding package, which included miles of curved cornice molding, baseboard, and chair rail, as well as wainscot paneling for the curved front wall.
Every piece of the molding in the house had a custom profile designed by the architect.
In all, the house had at least 150 different molding profiles.
Culin/Collela also created the entire kitchen package for the house.
This consisted of natural cherry cabinets with curved doors, as well as the wainscot paneling in the breakfast room.
Other work for this house included a curved bookcase for the library, a chestnut wainscot wall and chestnut tongue-and-groove ceiling in the family room, and a spiral staircase with wainscot paneling that went up three stories to the children’s living area.
Creating curved woodwork using traditional methods presents several challenges.
Typically a template is cut from a piece of fiberboard, either by hand or with a router, and then parts are trimmed flush to the template.
The template must accurately depict the radius of the curve.
Drawing the radius requires the use of a trammel or beam compass, and building one of these is a big undertaking for larger wood pieces.
If a particular piece of wood needs to have a 50ft radius, for example, someone has to take a 50ft length of wood and put a point at one end and pencil at other end, then physically swing the arc to get the proper curve.
Curved kitchen cabinets present additional challenges.
Not only must the doors be curved, but the box of the cabinet, face frame, styles, and rails must also be curved, and they all require different radii to fit together perfectly.
For example, assuming the curve of the cabinet is concave, interior parts such as the box must have one radius while parts farther out such as the door must have a larger radius.
The kitchen cabinet doors for the Conyers Farm house had a 45ft radius.
With this large radius it wasn’t obvious that the doors were actually curved.
If they had not been curved, the installed cabinets would have had a faceted appearance.
To draw the different radii for these cabinets by hand would have required using the 45ft compass and then adjusting the resulting radius for each cabinet part.
Culin/Collela executives realized that CAD/CAM technology could alleviate some of this work, but when they looked at computer-controlled woodworking machines, they saw prices in the neighborhood of US$60,000.
That was impossible to justify at the company’s current workload.
Then the company heard about the Techno CNC wood router, which costs less than US$16,000 and is designed for production routing and drilling on a wide variety of materials including wood, plastic, MDF, solid surfacing materials and nonferrous metals.
By using this router, Culin/Collela has greatly simplified the process of producing complex curved millwork.
The router works in conjunction with the company’s AutoCAD design software (Autodesk, San Rafael, California).
They export AutoCAD files, which contain accurate curve radii for all parts, to CAD/CAM, generate CNC programs, and produce templates and finished parts on the router.
Production time has been reduced by an average of 50% on the items produced by the router.
And, quality has been substantially improved because the computer-generated programs provide far more accuracy than the company was ever able to achieve with manual methods.
The process Culin/Collela followed started with the creation of shop drawings in the AutoCAD system and submitting them for the architect’s approval.
Once that was done, a full-time employee worked with the production manager to determine what templates and cauls were required for what operation.
That employee then took the appropriate drawings from the CAD system and transferred them to CAD/CAM to generate all the toolpaths required to create those templates and cauls.
The CAD/CAM work took about 200h for this house.
They used the router to make two types of templates: fiberboard templates for use with the shaper and knife grinding templates.
Knife grinding templates are used to create the knives that go into the molder head and cut the profile of the molding.
Molding knives are only as good as the template, so the CNC router was important in this project to get a high degree of precision.
After templates were created they were taken to the molder or the shaper to cut the actual part.
The molder was a Weinig Profimat four-headed molder with automatic head positioning.
The shaper was an SAC 10HP tilting arbor shaper capable of profiling edges of curved pieces and trimming on a curve.
The cauls used in this project held strips of solid cherry molding in a curved shape while the glue that held them together dried.
The router was used to cut all the ribs and parts for cauls so they had the exact radius needed.
CNC enabled them to produce knife grinding templates in one-third the time needed by hand, or about 20 min/knife template versus 1h by hand.
In all, producing the curved millwork for this house took approximately 4000h, which Culin/Collela estimates would have been closer to 8000h without the Techno CNC machine.
In addition to the time it saved, the accuracy of the router won Culin-Collela high praise from the architect for the quality of their work.
The CNC router concept is clearly an idea whose time has come in the carpentry business.
It makes it possible to improve the quality of many products by allowing complex geometries to be produced to a high level of accuracy.
At the same time, costs are reduced because of the elimination of time-consuming hand work.
Best of all, the Techno routers are available at a fraction of the cost of traditional CNC machining equipment.
http://www.manufacturingtalk.com/news/toi/toi119.html
Posted by admin under Wood machining | No Comments »
